Sample Concentrator : Sample Concentrator LSCO-A10

Sample Concentrator LSCO-A10

Sample Concentrator LSCO-A10 accelerates the concentration of samples by blowing nitrogen gas at the rate of 15 L/min. It comes with a microprocessor controller which controls the temperature of high-purity aluminium when the equipment is in operation. The models have provisions of concentrating around 3 to 24 samples at a time.

Get Catalog
Number of samples 3 to 24 wells
Nitrogen Flow Rate 15 L/min
Nitrogen Pressure 0.02 MPa (Gas needle ≤ 16pcs) 0.05MPa (Gas needle > 16pcs)
Block Quantity 1
Temperature Control Range Room temp. +5 ℃ to 160 ℃
Needle length 150 mm
Temp. uniformity ≤ ± 0.5 ℃
Temp. accuracy ±0.5 ℃ (at 40 ℃) ± 1 ℃ (at 120 ℃)
Display accuracy 0.1 ℃
Heating time ≤ 15 min (from 25 ℃ to 160 ℃)
Timing range 1 min - 99 h 59 min
Voltage AC 220 V or AC 110 V, 50 / 60 Hz
Power Consumption 300 W
Dimension 260 x 220 x 450 mm
Weight 7 kg
  • Microprocessor based PID controller
  • High-purity aluminium as heat conducting medium
  • Precised temperature control
  • Adjustable airflow rate
  • Large number of samples can be blowed at a time
  • Individualistic blowing of sample
  • Can be easily operated

Sample Concentrator is used for sample preparation, drug screening, hormone assays, chromatographic analysis and scintillation counting.

Request Quote