|
Output (25°C) |
30 Litres/hour
|
|
Flow rate |
Up to 2 litres/minute (with pressure tank)
|
|
Pure water outlet |
1 : reverse osmosis water
|
|
RO water quality |
|
Ion rejection rate |
96 to 99 % (with new RO membrane) |
|
Organics rejection rate |
> 99 % (when MW > 200Dalton) |
|
Particles and bacteria rejection rate |
> 99% |
|
Bacteria |
< 0.1 cfu/ml (with optional 0.45+0.1 μm PES terminal filter) |
|
Particle( >0.1μm) |
< 1/ml (with optional 0.45 + 0.1 μm PES terminal filter) |
|
|
Pure water quality |
|
Desalination rate |
Nearly 100 % |
|
TDS |
RO water: 5 to 10 ppm |
|
Resistivity |
15-18 MΩ.cm |
|
Conductivity |
0.067 to 0.055 µs/cm |
|
Pure water outlet |
RO water, deionized water |
|
|
Purification System |
|
Pre-treatment unit |
Special spun fibre cartridge Special active carbon block cartridge Special active carbon block cartridge |
|
RO unit |
100GPD RO membrane ×2 |
|
Subsequent Unit |
Mixed bed resin cartridge ×3 |
|
|
Working Environment |
|
Inlet water |
Tap water (TDS < 200ppm will be suggested). If inlet water TDS >200 ppm, pre-treatment is recommended. Water with higher TDS will affect the quality of outlet water and life of purification cartridge. |
|
Feed water requirements |
For Tap water; temperature: 5 to 45℃, pressure: 1.0 to 4.0 Kgf/cm2 |
|
|
Other Details |
|
Control System |
Automatic electronic pressure sensor, automatic stop without water, automatic cutting off if pump stops, RO membrane auto flushing , automatic stop when water tank full, Guarantees 24 hr work |
|
Standard configuration |
Main body (Including 1 set of cartridge) + 4.0 gallon water tank + TDS/conductivity test pen |
|
Electrical requirements |
AC 110 to 240 V, 50/60 Hz |
|
Power |
72 W |
|
Dimension (L× W × H) |
410×220×420 mm |
|
Weight |
about 16 kg |
|
-
Supplies Type 1 (ultra-pure) and Type-3 (RO) water
-
Spun fiber and active carbon block cartridge, 100 GPD RO membrane
-
Includes TDS/conductivity pen
-
4 gallon water tank
-
Auto power on and off according to water outflow and inflow
-
Compact Design
It is used to prepare ultra-pure and RO water. RO water is used in general biology experiments, agricultural experiments, ware washing, as an inlet for ultra-pure water etc. while ultrapure water is used in steam generators, injection water in healthcare, microanalysis, etc.
