|
Interior Volume |
100 L
|
|
Heat load |
1000 W
|
|
Temperature Range |
0℃ to 100 ℃
|
|
Temperature Deviation in time |
± 2.0 ℃
|
|
Temperature Fluctuation |
± 0.5 ℃
|
|
Humidity Range |
20% to 98% RH
|
|
Humidity Deviation in time |
± 2.5% RH
|
|
Cooling Rate |
1 ℃ / min
|
|
Heating Rate |
3 ℃ / min
|
|
Cooling system |
Mechanical compression refrigeration system
|
|
Refrigerating unit |
French TECUMSEH compressor
|
|
Refrigerant |
R404A, R23
|
|
Heating Element |
Nichrome heater
|
|
Controller |
Programmable color LCD touch screen controller Ethernet connection, PC Link
|
|
Water supply system |
Automatic water supply Water purification system
|
|
Humidifier |
External isolation, stainless steel surface evaporation humidifier
|
|
Dehumidification |
Evaporator
|
|
Temperature Sensor |
PTR Platinum Resistance PT100 Ω/MV A-class, accuracy 0.001℃
|
|
Humidity Sensor |
Dry and wet bulb sensor
|
|
Build-in Water Tank |
270 × 300 × 400 mm
|
|
View Window Size |
250 × 280 mm
|
|
Air Circulation |
Centrifugal wind fan
|
|
Exterior Material |
Steel Plate with protective coating
|
|
Interior Material |
SUS304 stainless steel
|
|
Thermal Insulation |
Polyurethane foam and insulation cotton
|
|
Observation Window |
Interior lighting, double-layer thermo stability silicone rubber sealing
|
|
Standard Configuration |
1 Cable hole (Φ 50,) with plug; 2 shelves
|
|
Maximum Noise |
65 dBA
|
|
Ambient Temperature |
5℃ to +35 ℃
|
|
Relative Humidity |
≤ 85% RH
|
|
Internal dimension |
400 × 500 × 500 mm
|
|
External dimension |
860 × 1050 × 1620 mm
|
|
Power Supply |
220 V, 50 Hz / 380 V, 50 Hz
|
|
Net weight |
290 kg
|
|
Gross weight |
340 kg
|
-
Designed with PID controller system to control main unit, temperature system and Display
-
Double layer insulating glass 8 cm thick, made of tempered glass
-
Internal material designed with mirror surface finishing, 304 stainless steel which is rust proof, corrosion resistance
-
Heat load can absorb 1000 W in -20℃
-
Built-in LED light for the working room light which clearly observe samples
-
The filter element is suggested to be replaced once a year
-
Water re-circulation system consisting of water purifier which purifies sourced water to water tank, reduces water use and series of pipes
-
Designed with PT-100 sensor, real time accurate detection and display of temperature
-
Wet gauze and a real-time temperature, converted by temperature difference, show real-time relative humidity
-
LCD display, which can display test conditions
-
Equipped with automatic humidification, which automatically heated by the humidification tank
-
High and low temperature corrosion resistance external material is made up of A3 steel plate with galvanized coating
-
Provides protection against over temperature, water shortage, over current, earth leakage, phase sequence, humidifier dry combustion, and refrigerant high pressure
-
10 cm thick polyurethane foam and insulation cotton provides better insulation
-
Standard test Cable hole 50 mm inner diameter, located at left side of work room, is provided with sieve inside to prevent moisture from entering the room
-
SUS304 stainless steel shelves, standard configuration 2 pcs (removable, adjustable height), 50 kg sample load of each shelf
-
4 movable castors for ease moving, and with brakes function
Drug Stability Test Chamber is used in food industry also basic used in advanced research, Pharmaceutical Drug stability testing point, chemical industries, and including testing products relating to aerospace, electronics, automobile and environmental stress screening etc.
