Falling Weight Impact Tester TFWT-A10 is mainly used to calculate impact resistance of thermoplastic sheets, pipes and plastic fittings under given specified conditions of impact by means of falling weight. It determines anti-impact properties of plastic pipes, sheets and other products. This impact tester is adopted with PLC control & digital touch screen technology for controlling parts like proper figure setup, zero adjustment, preset dropping height, raising & dropping hammer. Adopted with pneumatic technology to prevent secondary impacts with 100 % capture rate.
Get Catalog| Temperature range | 10 to 35°C |
| Maximum falling height | 2000 mm |
| Resolution of displacement | 1 mm |
| Height error | < ± 2 mm |
| Hammer mass | 0.25 to 16 kg |
| Noses of strikers | d25 to d90 |
| Dimension | 730×700×3600 mm |
| Power supply | AC 220 V +/- 10 %, 50 Hz single phrase |
| Net weight | 300 kg |
Falling Weight Impact Tester is used for impact testing strength of plastic sheets, pipes.
Request Quote
| Sample (size) length | Diameter ≥30 mm, Thickness ≤ 40 mm |
| Sample width | |
| Measuring range |
| Sample (size) length | Diameter ≥30 mm, Thickness ≤ 40 mm |
| Sample width | |
| Measuring range |
| Sample (size) length | 38×70 mm |
| Sample width | |
| Measuring range | (1-500) mN.m (divided into 7 small ranges) |
| The maximum temperature | 300°C |
| Temperature fluctuation | Within ± 0.5°C |
| Temperature uniformity | Within ± 1°C |
| Temperature control range | Room temperature to -70 ℃ (room temperature ≤ 25 ℃） |
| Temperature accuracy | ± 0.3 ℃ |
| Impact speed | 0℃ to -30℃ around 2.5 ℃/min -30℃ to -40℃ around 2.5 ℃/min -40℃ to -70℃ around 2.0 ℃/min |
| Mixed capacity | 0.5 to 1 kg, 2 to 3 kg, 5 to 7 kg |
| Temperature range | RT to 300°C |
| Temperature control system | PID control |
| Test arm weight | 2.5 N |
| Additional Loads | 2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N, |
| Idler | 150 mm |
| Preliminary test force | 98 N |
| Total test force | 588, 980, 1471 N |
| Brinell hardness test |
| Preliminary test force | 98 N |
| Total test force | 588, 980, 1471 N |
| Brinell hardness test |
| Preliminary test force | 98 N |
| Total test force | 588, 980, 1471 N |
| Brinell hardness test | 306, 613, 1839 N |
| Measuring range | 0.001 to 9999 |
| Stability | A (absorbency of light) |
| Linearity error |
| Measuring range | 0.001 to 9999 |
| Stability | A (absorbency of light) |
| Linearity error |
| Salinity Measurement range | 0.00 to 19.99 ms/cm |
| Measuring accuracy | EC ± 2% full scale |
| Temperature Measurement range | -5 to 50°C |
Copyright @ labtrononline.com
