Labtron LAAT-A13 is composed of automatic potential titrator and titration device. It is designed according to Industry Standard of Petrochemical and follows ASTM D2896 and ASTM D4739"Test Methods for Base Number of Petroleum Products".
Get Catalog| Volumetric analysis |
Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.02 ml |
| Automatic acid titration |
Titration condensation: 0.1 N; Controlling accuracy: ≤ ± 0.1 pH |
| Automatic potential control |
Titration condensation: 0.1 N; Controlling accuracy: ≤ 10 mV |
| Ambient temperature | 0 ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Temperature compensation | Manual compensation; 5 ~ 60 ℃ |
| Preset adjustment range of end point | pH 1 to 13 or ± 100 ~ 1300 mV |
| Preset controlling range for titration | 1 ~ 3 pH or 100 ~ 300 mV from end point |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It is used to determine and calculate base number of sample based on acid-alkali neutralization principle, perchloric and acid potentiometric titration methods and potential changes to detect end point
Request Quote
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Calorimeter type | Isoperibol |
| Oxygen filling | Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering |
| Bomb volume | 250 ml |
| Measuring Range For Aviation Gasoline | 86.0 to 105.0/MON |
| Measuring Range For Gasoline For Motor Vehicles | National standard: 65.0 to 110.0/RON National-V standard: 70 to 115.0/RON Blended gasoline: 75.0 to 120.0/RON Light gasoline: 50.0 to 85.0 /MON Isomerized gasoline: 85.0 to 120.0/RON Arene gasoline: 90.0 to 120.0/RON |
| Measuring Range For Ethanol | E93: 92.0 to 95.0/RON E97: 95.0 to 99.0/RON Judgement: 60.0 to 120.0/RON |
| Measurement item | motor gasoline and diesel |
| measurement unit of octane is ON | 40 to 120 |
| Permissible error of octane | ± 0.5 max |
| Graduated flask | 100 ml，50 ml |
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Measurement range | Room temperature ~ 150°C |
| Stirring speed | 0 ~ 1200 r / min |
| Heating power | 25 W |
| Ambient temperature | 10 °C ~ 40 °C |
| Relative humidity | ≤ 80 % |
| Ignition Mode |
| Ambient temperature | 10 °C ~ 40 ℃ |
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Timing range | 1 s to 9 min 59 s |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Timing range |
| Heating power | 2 kW |
| Cooling power | 0.5 kW |
| Steam temperature | 0 to 400℃ |
| Ambient temperature | -10°C to 35°C |
| Relative humidity | ≤ 85 % |
| Thermometer | Each one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C |
| Graduated flasks | 100 ml |
| Scale division of graduated flask | 1ml |
| Distillation flask | 125 ml |
| Beaker quantity | 600 ml |
| Ambient temperature | (-10) °C ~ 40 °C |
| Relative humidity | ≤ 85 % |
| Beaker quantity | |
| Ambient temperature | ≤ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Graduated Flask | 200 ± 0.2 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Graduated Flask | 100 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Graduated Flask | 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials) |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Bath type | Oil bath |
| Bath capacity | 5000 ml ± 50 ml |
| Ambient temperature | Room temperature to 35 °C |
| Ambient temperature | 15 to 35°C |
| Relative humidity | ≤ 85% |
| Capillary viscometer | 6 capillary Pinkevitch viscometer tubes |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Freezing point range | -54°C to 2°C |
| Cold bath measurement temperature range | -70° to 20°C |
| Temperature controlling accuracy | ±0.5°C |
| Measurement range | |
| Temperature controlling accuracy | |
| Refrigeration system |
| Measurement range | |
| Temperature controlling accuracy | ± 0.5 ℃ |
| Refrigeration system | New-type refrigeration compressor |
| Thermometer | 6 ℃ ~ 400 ℃ |
| Scale Division | 2 °C |
| Spout Aperture | 0.6 ~ 0.8 mm |
| Light source | |
| Temperature of grinding milk white light bulb | |
| Light hole( Φ14) |
| Light source | |
| Temperature of grinding milk white light bulb | |
| Light hole( Φ14) |
| Light source | |
| Temperature of grinding milk white light bulb | |
| Light hole( Φ14) |
| Type | Compact; Desktop |
| Design | Integrated |
| Bath | Metal bath (without water usage) |
| Temperature Range | Ambient to 150℃ |
| Temperature Precision | ± 0.1°C |
| Test Unit | 2 units |
| Samples | 2 |
| Temperature | |
| Oil bath cubage | 30 L |
| Heat capacity | |
| Temperature measurement range | |
| Temperature controlling range | 10 ℃ ~ 35 ℃ |
| Heat capacity | |
| Temperature measurement range | 10 ~ 35 ℃ |
| Temperature controlling range |
| Heat capacity | 14000 ~ 15000 J / K |
| Temperature measurement range | 10 ~ 35 ℃ |
| Temperature controlling range |
| Coking furnace | Metal furnace |
| Heating mode | Electric heating |
| Test unit | 5 units |
| Porcelain crucible | 30 ml |
| Inner iron crucible | 75 ml |
| Outer iron crucible | 190 ml |
| Porcelain crucible | |
| Inner iron crucible | |
| Outer iron crucible |
| Sample hole | 4 pieces |
| Sample quantity | 4 to 12 pieces |
| Ambient temperature | Room temperature to 35 °C |
| Sample hole | 2 pieces |
| Speed of stirring motor | 1400 rpm |
| Ambient temperature | 10 to 35°C |
| Sample hole | 4 pieces |
| Speed of stirring motor | 1400 rpm |
| Speed for sample stirring | 1000 ± 50 rpm |
| Air flow rate | |
| Max. Preset time | |
| Chamber diameter of oven |
| Air flow rate | Not less than 150 L / h |
| Max. Preset time | 99 min 59 s (100 min) |
| Chamber diameter of oven | Φ22 mm |
| Test bomb | |
| Operation temperature of water bath | RT ~ 90 °C |
| Bath temperature |
| Test bomb | Two samples or a group of parallel samples |
| Operation temperature of water bath | |
| Bath temperature | 37.8 °C |
| Ambient Temperature | 10°C to 35°C |
| Measurement Range | 0 to 100 mg |
| Resolution | 0.1 µg |
| Maximum current | 400 mA |
| Measurement range | 3 µg to 9999.9 µg |
| Resolution | 0.1 µg |
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec |
| Time accuracy | ± 0.1 seconds |
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec or 60 sec |
| Time accuracy | ± 0.1 seconds |
| Penetrometer | 0 to 600 penetration scale, 5 sec or 60 sec, ± 0.1 seconds, 0.1 penetration, ± 1 penetration, 2.5 ± 0.05 g, 700 × 400 × 750 mm, 30 kg |
| Circulatory Water Bath | 3.5 L, 5 °C to 60 °C, ± 0.1 °C, 3 L/minute, 2 m, 1200 W, AC 220V ± 10 %, 50 Hz, 600 × 400 × 650 mm, 40 kg |
Copyright @ labtrononline.com
