UV absorption ozone meter LUOM-A10 is a portable unit used to measure ozone concentrations. It offers a wide detection range along with real time data recording. A built-in printer facilitates direct printing of current and pre-recorded data for end user convenience.
Get Catalog| Ozone measurement range | 0 ppm ∼ 100 ppm/ 0 ppm ∼ 1000 ppm |
| Flow rate | 1 L/min |
| Accuracy | 0.01 ppm |
| Measuring time | 10 seconds |
| Boot time | ≤ 10 min |
| UV source and life |
UV lamp ( 254 nm ) 5000 hours |
| Gas pipe dimension | Ø 4 mm |
| Operating temperature | 0 °C ∼ 40 °C |
| Operating humidity | 10 % ∼ 60 % RH |
| Print time interval | 10 seconds |
| Print format |
2001/01/01 11:01 000.001 ppm |
| Communication interface | USB , WiFi (optional) |
| Power supply | AC 220 ± 10 % 50 Hz ± 5 % |
| Dimensions | 280 x 300 x 195 mm |
| Weight | 5.5 kgs |
Used in ozone preparation workshop, detection of ozone concentration in ozone sterilizing cabinets, medical devices, and atmospheric environment; for determination of antioxidant capacity of analytical instruments; in industries such as chemical, petroleum, paper making, spinning, textile, pharmaceutical, water treatment, food and drug sterilization etc.
Request Quote
| Sampling | With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection |
| Gas | Ethylene C2H4 |
| Measure Range | 0 to 1000 ppm |
| Sampling method | Diffusion |
| Sensor type | CO2: solid electrolyte sensor, O2：electrochemical sensor |
| Detection range | CO2：0.04 to 5.00 % and O2：0.0 to 30.0 % |
| Sampling Method | Diffusion |
| Working conditions | Temperature -20 to 50°C Pressure 0.9 to 1.1 (standard atmospheric pressure) Humidity 10 to 95 % RH (no dew condensation) |
| Explosion proof grade | Exia II CT3 |
| Measuring range | 0 ∼ 125 Pa |
| Accuracy | 0 ± 0.2 Pa (liner error) ± 1 % |
| Repeatability |
| Temperature Measurement Range | -10℃ to 60℃ |
| Temperature Resolution | 0.1°C |
| Temperature Accuracy | ± 1.5℃ |
Copyright @ labtrononline.com
